DAVCO PRODUCTS
LIQUID APPLIED WATERPROOFING MEMBRANE
DAVCO K10 SOVACRYL PH
Is a liquid acrylic waterproofing membrane for roofs and facades. Applied in a thick layer, the paint forms a waterproof, flexible film which adapts to the surface changes caused by tension or expansion.
Download Data Sheet here.
​
DAVCO K10 PREMIUM is a liquid-applied polyurethane-containing elastomeric seamless waterproofing membrane. Moisture-cured characteristics ensures that further works can be carried out at a shorter time once the membrane has dried out.
Download Data Sheet here.
​
DAVCO K10 ACRYLIC PRIMER
Is used as a primer, sealer and bonding agent to prepare floor surfaces prior to the application of waterproofing membrane & wall-coating system.
​
DAVCO K10 SOLARTAC
Is a heat shielding and waterproofing coating that uses advanced insulation technology to reduce the interior temperature of buildings. It is ideally used for roofs and walls in both commercial and residential buildings.
REPAIRING AND GROUTING
Lanko 702 PH DURABED
Is a high strength Class A structural grout for most normal grouting installations. Gaseous expansion in the plastic state ensures positive contact
Download Data Sheet here.
​
Lanko 712 LANKOROAD RAPIDEX
Is a fast-setting repair mortar for roads and floors.
Download Data Sheet here.
​
Lanko 731 LANKOREP STRUCTURE PH
Is a fibre-reinforced non-shrink mortar for repair of concrete structures and reinforcement of weakened structures with application thickness of 5mm to 50mm.
Download Data Sheet here.
​
Lanko 732 LANKOREP FACADE
Is a fibre-reinforced non-shrink mortar for repair and structure concrete facades. Application may be from 1 mm to 35 mm thickness.
Download Data Sheet here.
FLOORING AND
SURFACE PROTECTION
LANKO 162 RD FLOW PRIME
Is a bonding primer which creates a bonding key on smooth, sealed or porous substrates. It increases bonding strength while reducing the absorption capacity of the substrate.
Download Data Sheet here.
​
LANKO 123 LANKOSELF THICK
Is a ready-to-wet self-levelling screed for preparing old and new interior and exterior floors before applying or laying carpet, vinyl sheeting, tiles, parquet, rubber or floor paints. Application thickness is from 7 mm to 20 mm.
Download Data Sheet here.
​
LANKO 173 LANKOSELF SKIM
Is a self-levelling screed for old and new interior floors. Application thickness is between 3 mm and 8 mm. It is a ready-to-wet mortar for preparing substrates before laying thin floor coverings. Lanko 173 can be covered with most floor coverings.
Download Data Sheet here.
​
LANKO 243 LANKOFLOORHARD
Is a non-metallic floor hardener that provides protection against abrasion of carparks, industrial factories, power stations, loading areas, warehouses, steel mills and department stores.
Download Data Sheet here.
​
LANKO 783 ACRYLIC POLYMER
Is a cementitious coating ideal for carparks and industrial floorings. It is a two-component high performance mortar resistant to abrasion, impact and skidding. Application thickness is 3 – 5 mm.
Download Data Sheet here.